The Bass FX Console BFX-1 enables the playerís favorite pedals with one action without interrupting technical performance. A buffer circuit employs the VITALIZERÆ B to minimize tonal degradation from switching and patch wiring in the system. Also, the 4 band EQ/preamp of the Providence Bass Preamp technology is loaded for more tonal versatility. With the D.I. Out, The Bass FX Console is an active bassistsí new pedal hub system to control myriads of sounds. Loops 1 through 3 are connected in series (one after the other). Signal switching is accomplished via precision mechanical relays. When a loop is OFF the corresponding SND output is muted so that no signal is sent to the connected effect unit. This eliminates the possibility of unwanted oscillation due to cross-talk when high-gain effects are used. Loop 4 is totally independent and uses the same type of precision mechanical relay as loops 1 through 3 for switching. In addition to functioning as an independent loop, the separate loop SND jack can also be used as a latching N.C. (Normally Closed) switch, and the OUT jack can be used as latching N.O. (Normally Open) switch for remote amplifier channel switching. This loop is completely independent, right down to the ground line, so you can use it as a control switch without having to worry about ground loop problems. The separate loop can be used as a mute loop, an A/B switcher, and other utility functions. When the three series loops arenít enough for your system, you can patch the series loop OUT jack to the separate loop IN jack to provide a fourth series loop.
Weight: 0.8
Terrif Code: 92099400